Waterjet Filters

Model Number – WJ729-0.35, WJ729-1, WJ829-0.35, WJ829-1

Nominal Micron Levels Available – 0.35, 0.5, 1
 

Overview

The Waterjet Filter line from Dynamic Filtration is a new line of pleated waterjet filters that are used for water filtration in Ebbco and OMAX waterjet filtration systems and in various cartridge housings/vessels made by Harmsco, Ebbco, Shelco, CSD, etc. The filter is designed in a variety of micron levels to meet the needs of the application and provides a longer service life than the competition due to higher levels of media in the filter. Designed for a high flow rate and low pressure drop.

Product Description

The Dynamic waterjet filter cartridges are made with a premium cellulose hybrid media for high dirt holding capacity and above average turbidity levels. It can be used with in-process water and oil fluids for industrial applications only. Not for potable water systems.

Download PDF >

WJ729

WJ829

IF618

Part #
0.35 Micron		 Part #
0.5 Micron		 Part #
1 Micron		 ID - TOP ID - BOTTOM OD Height
WJ729-0.35 WJ729-0.5 WJ729-1 3" NPT
(76 MM)		 2 5/8"
(67 MM)		 7 3/4"
(178 MM)		 29 1/8"
(740 MM)
WJ829-0.35 WJ829-0.5 WJ829-1 2 5/8"
(76 MM)		 2 5/8"
(67 MM)		 7 3/4"
(178 MM)		 28 3/8"
(721 MM)

Product Features

Materials of Construction:

  • Filter Media - Premium phenolic resin impregnated cellulose synthetic hybrid pleated media is used for high dirt-holding capacity
    and economical filtration.

  • Inner Core - Electroplated Steel to prevent cartridge collapse at high pressures.

  • End Caps - High Strength ABS

  • Buna-N gaskets - Optimize the seal. Other materials available. 

Specifications:

  • WJ729-0.35 - 7 3/4” OD x 2 5/8” Bottom ID x Threaded Cap 3” NPT Top ID, 29 1/8” Ht., 0.35 µm, Single Pleat, Connection - Standpipe, 2 Per Carton

  • WJ729-1 - 7 3/4” OD x 2 5/8” Bottom ID x Threaded Cap 3” NPT Top ID, 29 1/8” Ht., 1 µm, Single Pleat, Connection - Standpipe, 2 Per Carton

  • WJ829-0.35 - 7 3/4” OD x 2 5/8” x 28 3/8” Ht., 0.35 µm, Single Pleat, Connection - Standpipe, 2 Per Carton

  • WJ829-1 - 7 3/4” OD x 2 5/8”x 28 3/8” Ht., 1 µm, Single Pleat, Connection - Standpipe, 2 Per Carton

  • Differential Collapse Strenght - 50 psi

  • Temperature - 225°F (107° C)

Replaces Part Numbers:

  • Threaded Caps  (DF Part #- WJ729-):
    Ebbco HR-930-Q.35 (Threaded Top), CSD Part# -829B.35, Omax Part # - 201348, MCLR Part # 829.35

  • DOE Flat Standpipe Caps
    (DF Part # - WJ829-):
    OMAX Part # - 206954, MCLR Part # 728.35  

Applications

  • OMAX waterjet systems that use cartridge vessels 

  • Ebbco Closed Loop Waterjet Systems

  • Flow units that use Ebbco CLS systems

  • AKS Closed Loop Systems for Water-Kut X2, X3, X4

  • Mitsubishi - MWX3-612, MWX4-612, DS510, DX510, Evolution-X5, Suprema

  • Jet Edge – X-3, X-5, X-3-HR, X-5-HR, Jetstart 510A, 510A5